$1,359.99
$1,599.99
Save 15% - August 18-27 ONLY!
Rikon's 14" Deluxe Bandsaw, Model 10-326, has many professional features, including a quick-release blade tension level, large adjustable handles, a hinged safety blade guard with a sight window, a large work table and a storage cabinet base. The 1-3/4 HP motor provides ample power for...
Items You May Need
-
$22.99
Details
Rikon's 14" Deluxe Bandsaw, Model 10-326, has many professional features, including a quick-release blade tension level, large adjustable handles, a hinged safety blade guard with a sight window, a large work table and a storage cabinet base. The 1-3/4 HP motor provides ample power for most work encountered. Pre-lubricated, sealed thrust, and spring-loaded tool-less guide bearing system gives smooth blade support during difficult cuts. Includes 6" tall rip fence with re-saw bar.
Features:
- 1-3/4 HP motor provides more than sufficient power for cutting dense, thick hardwoods without the risk of stalling
- Upper guide/blade guard assembly with rack-and-pinion mechanism permits smooth height adjustments up to 13"
- Balanced cast iron wheels reduce vibration and noise
- Large cast iron table provides a broad, stable surface for working with large stock
- Quick-lock trunnion table angling system is equipped with a large handle and locking arm for rapid adjustment
- Quick-adjust fence system with 6″ tall rip fence and a removable re-saw bar
- Tool-free blade change and guide bearing adjustment
- Ball-bearing blade guides above and below the table help to prevent twisting and deflection
- Cabinet in the base provides storage for blades and other accessories
- Wired for use with 3-wire 120V receptacles
- Five-year manufacturer's warranty
- Motor: 1-3/4 HP TEFC, 115/230V, 60Hz, 1Ph
- Blade Length: 111"
- Blade Width: 3/16" to 3/4"
- Blade Speeds: 1,445/2,950 ft/min
- Cutting Capacity Height: 13”
- Cutting Capacity Width: 13-5/8”
- Table Size: 21-1/2” x 15-3/4”
- Table Tilt: -7° left, 45° right
- Miter Gauge "T" Slot Size: (2) 3/4” x 3/8”
- Height to Floor: 40-1/2"
- Fence Size: 18-3/4” x 1-3/4” x 6”
- Dust Port Size: 4"
- Base Size: 24” x 17-5/8"
- Overall Size: 74-1/2” H x 33-3/4” W x 25” D
- Machine Weight: 285 lb.
- Shipping Weight: 293 lb.
- (1) Rikon 14" Deluxe Bandsaw (Model 10-326)
- (1) Blade - 111" x 5/8” 4 TPI
Shipping / Billing Information
This product ships direct from the manufacturer:- Your order will ship in approximately 7-21 business days.
- This product is considered special order. Your account will be charged when you place your order.
- Residential delivery fee applies for all LTL items.
- Express or overnight shipping is not available for this product.
- Ships by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.
Return Information
If you have a return issue, contact Woodcraft Supply customer service @ 1-800-535-4482 for return details. Customer pays return freight.
When returning product, please include the invoice number or customer number and refer to the back of the invoice for shipping instructions.
If purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made.
To be eligible for credit for returned Rikon goods, customers must comply with each of the following requirements:Warranty Information
Request to return defective or damaged goods by distributors must be submitted to RIKON Power Tools and will be reviewed for product misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear before giving authorization to return said goods.
Defective/Damaged goods that are returned to RIKON Power Tools and show misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear are subject to a restocking charge equal to 15% of the credit given for the returned goods or $25.00, whichever is greater.
Articles & Blogs
Choosing a Bandsaw
Selecting the right bandsaw can be a daunting task,
so to make it a little easier we thought we would put together an outline
highlighting some of the critical components to consider.
Woodcraft Supports Fresh Wood Competition with $4,500 Gift, Thanks to Customers
Woodcraft has donated $4,508 to Fresh Wood, a student woodworking competition held during the biennial AWFS® Fair. The total represents a Woodcraft match of customer contributions during 2015.
It All Started With a Kitchen Knife
As part of our Mother’s Day series, we will introduce you to several superstar moms (and grandmothers!) who combine their love of family with their love of woodworking. Meet Lucette Jones - she found an old kitchen knife at 10 yrs old and hasn't stopped carving since.
Woodcraft 101 Table Saw And Bandsaw Selection
Eric Gorges of A Craftsman's Legacy has decided to build a new woodworking shop. Check out his plans for the shop and 2019. He also makes the decision to replace his family heirloom Table Saw and Band Saw.
Illinois Woodworker Wins Woodcraft Magazine 100th Issue Giveaway Grand Prize
Illinois, Colorado and Washington makers win Woodcraft Magazine 100th Issue Giveaway prizes.
Reviews
-
Great Bandsaw
I purchased this Rikon 10-326 bandsaw from the Woodcraft store in Woodbridge, Illinois. The staff at this store location were extremely helpful. The bandsaw has far exceeded my expectations. Tool free bearing adjustment is one of the many great features of this model. Resaw capacity and dust collection are superb. The fence stays true after installation and alignment. Rikon also offers a 5 year warranty unlike most manufacturers. I had one small issue and contacted Rikon’s customer service and they corrected the issue straight away. Great saw for the money.
-
Almost...
I bought a Rikon 10-326 just after Christmas, brought it home, and started the assembly process. After getting it most of the way done I learned that Rikon had not included the bolts to attach the table top to the saw. I called, they said they'd send them right over. January 8th... called again. January 13th... Still no bolts. I spoke with their guy who said that they are out of stock on the bolts and they'd send when they have them. After asking a few questions, I drove to Lowes, bought M8 bolts (standard fare) and installed the table. The saw is very well made, cuts very well in my initial test cuts yesterday, and is rock solid, except for the very poor customer service experience. Perhaps I'll revise this review when I do finally get the bolts (February?). That's the one black mark on an otherwise great product thus far.
-
Worked well
High quality Bandsaw with great resaw capability. I gave it a four star rating for a couple of reasons, over all I am very happy with the purchase. I did encounter a couple of very annoying issues with a brand-new Bandsaw. Upon unpacking I found the table with a substantial amount of rust on both the top and side, clearly it was either packed wet or was subject to a substantial amount of rain. The table did have a plastic bag surrounding it and was packed in some sort of Cosmoline or oil but water got in some way. I was able to sand and use steel wool to remove most of the oxidation / rust a stain is still visible. I also found nuts and washers at the bottom of the Styrofoam packing just thrown in there without any packaging. Like I said the bandsaw is a major upgrade to what I am used to using and I am thrilled with the accuracy and the power. The rack and Pinion Guide bar is a nice option but it does require guide bearing adjustment from top to bottom of travel. I also did purchase the mobile base for the Bandsaw, but i was disappointed with its functionality. When the stationary wheels are assembled to the base it inhibits the Storage cabinet door from opening past 60°. How a product like this gets past engineering and into production without this being noticed Is inexcusable. Both the engineer and the CEO of the company should be Flogged and then fired, no questions asked. To make the storage compartment functional the wheels will have to be extended outward requiring angle iron extensions. My shop is small so for certain functions I do need to move the saw. When this saw is in motion it is a little tippy to the front.
-
RIkon 14" Deluxe Bandsaw
I just received my new bandsaw, and while assembling it I found that the front right corner of the table was covered with heave rust deposits. I contacted Rikon and found them to be very willing to solve this issue. They are sending me a new table. The person I talked with was Raymond Middleton, and he was very courteous, friendly, and helpful. A pleasure to do business with. I completed the assemble and setup of my new bandsaw, then made a few test cuts. This saw cuts beautifully. Nice even, straight cuts. No wobbling or drifting of the blade. Very smooth running a quiet, as power equipment goes. You cannot go wrong with this saw.
-
Excellent Customer Service
Recently purchased this saw, four bolts were missing. A phone call to their customer service and all was taken care of in 10 minutes, Parts are being shipped by 2 day USPS. Very friendly and knowledgeable. Will update later when i get running
-
Great Bandsaw
I just made my first cuts with the Rikon 10-326. I have to say that I am impressed thus far. I was torn between a 17" Grizzly and the 326. Picked it up at the Wilmington store. It took my son and I about two hours to completely set it up. One problem though. Instead of having a right and left side panel, I had two lefts. We drilled a hole for the door knob instead of waiting for the correct panel. works just fine except now I have unused hinges on the front. Saw is smooth running.
-
Rikon 10-326
Did reseach and was buying a Rikon Band Saw At wood Craft ask the diffence between 10-324 and 10.326 they help and told me what I need to know. Was they wright I am new at band saw love this new 10-326 did not know that you could cut thing like that and cutting is smouth. I like you can stand a nickel on edge and run the saw. Buy the mobile with saw so you can clean around it. LOVE The SAW. Thanks Wood Craft Greenville SC store.
-
Wow
Bought this the other day. All I can say is this thing is a beast. Not only heave duty but really heavy. Make sure you have two people to move and put together. Other than that it's worth every penny. Great buy
-
Rikon
Never been to the 86st store before today, and yes fellows, I took the wife. And was waited on by John, I knew what wanted kinda, walked out with a new Rikon bandsaw 10-326. Thanks John. Love the saw.
-
New10-326
I did a lot of research before buying the Riki's 10-326 and glad I did. This is a lot of bandsaw for the money. People at the Indianapolis Woodcraft were more than helpful and provided excellent service and suggestions. I went to their store and picked it up myself to expedite getting to use the saw. I needed some assistance to place saw on stand but otherwise assembly was easy(took an hour and 15). I resawed a burl and several pieces of exotics and the saw never hesitated and it 1/8 consistently. I am very pleased with this machine thus far. Thanks to the guys at Woodcraft and Riki's for providing quality tools and service.
-
Brand-Spanking New Bandsaw User
I am brand new to bandsaws, but I often find myself in the shop wishing I had one. Sometimes I even used my scroll saw for rough cutting along lines. I purchased this bandsaw today, along with the "Mobility Kit." The main portion of the bandsaw is already assembled; however, I had to assemble the base, attach the table, and fence...NONE OF THIS IS A BIG DEAL TO ME! I'm merely pointing out what you're in for if you decided to purchase this bandsaw without having Woodcraft assemble it for you. Anyway, I ended up with a few extra pieces but I was able to successfully assemble it. I recommend watching Rikon's assembly video on their website and following the instructions that came with the saw. The video is good, but it is easy to miss some things, like using washers when attaching the table. The instructions leave a lot to be desired as well, but when both the video and instructions are used in conjunction with each other the assembly process is much easier.
Compare With
-
$1,699.99
